SCSI Sample Transfer in Wavelab
An Example with Emu Esi2000
 
- Screenshot about Sample Transfer in Wavelab v.5.x , Original Pix Dec.2006 deep!sonic
After start Wavelab you simply go in Menu to Sampler Configuration.
Only in first Time it's required to make a Configuration for your Sampler.
 
- Screenshot about Sample Transfer in Wavelab v.5.x , Original Pix Dec.2006 deep!sonic
In the Options i found diffrent SCSI-Configuration. Choose "Emu Esi-32 SCSI".
This Setting also works with Esi 2000 and Esi4000.
In the List above you see all Drives in of your SCSI-Chains.
Esi2000 and Esi4000 listed als same, this i choose.
(If you not installed SCSI you also can work with Samplemididumps)
 
- Screenshot about Sample Transfer in Wavelab v.5.x , Original Pix Dec.2006 deep!sonic
This Settings are enough. Here i save (add) my Configuration with the Name
"Esi 2000". In future everytime i need i choose this Configuration.
 
- Screenshot about Sample Transfer in Wavelab v.5.x , Original Pix Dec.2006 deep!sonic
I want recive a Sample. Go to Sampling Recive.
 
- Screenshot about Sample Transfer in Wavelab v.5.x , Original Pix Dec.2006 deep!sonic
My Destination is the Configuration "Esi 2000". Now i simply write
the Sample Number from Esi2000 i need. Then press "recive".
 
- Screenshot about Sample Transfer in Wavelab v.5.x , Original Pix Dec.2006 deep!sonic
It goes very fast. The required Sample is loadet in Wavelab.
Wavelab also shows the Looppoints, Key, and all other things :-)
Now it's possible to save on Computer, edit, send back, and lot other things.
 

www.deepsonic.ch - gmacht ir Schwiiz
www.deepsonic.ch - made in switzerland
- To go @home click here  - Write into deep!sonic's guestbook, click here  - To contact deep!sonic click here
© deep!sonic 98-10 - 10.12.2006 - 01:00h